Body Electrical System

Repair Procedures

4steps
~24min
2/5difficulty
Done 0 of 4

Removal

  1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
  2. Remove the horn (A) after loosening the mounting bolt.

Installation

  1. Install the horn after connecting the horn connectors.
  2. Install the front bumper cover.

Inspection

  1. In this vehicle, the horn relay is installed in the engine room relay box printed circuit board unit.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.