Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the glove box. (Refer to Body - Glove Box Assembly Upper Cover)
3. 3
   Remove the smart key unit. (Refer to Body - "Smart Key Unit")
4. 4
   Remove the body control module (A) after loosening the nuts.

   

5. 5
   Disconnect the connectors from the Body Control Module (A).

   

Installation

1. 1
   Install the Body Control Module.
2. 2
   Connect the Body Control Module.
3. 3
   Install the glove box upper cover assembly.

BCM Diagnosis Using GDS

1. 1
   Body electrical system malfunctions can be quickly diagnosed with the Global Diagnostic System (GDS). The GDS provides the following information.

   1. Self-Test: Check Diagnostic Trouble Code (DTC) and display.
   2. Current Data: Check the system input/output status.
   3. Actuator Test: Check system operating status.
   4. Additional functions: other controls, such as option setup and zero adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "Body Control Module (BCM)" to check the body control module.
4. 4
   Select the "Current Data" menu to check the current input/output status. Input/output data for sensors related to the Body Control Module (BCM) can be checked.

   

5. 5
   To change a user setting, select "User Settings".