Smart Key System Repair Procedures

Smart Key

1. 1
   Connect the GDS DLC cable to the data link connector (16-pin) in the lower instrument panel on the driver side, then turn on the GDS power.

   

2. 2
   Select the vehicle model, then perform "Saving Smart Key Code".

   

3. 3
   After selecting the "Smart Key Learning" menu, press the "Enter" key. The screen will then be displayed as shown below.

   

4. 4
   After receiving the learning smart key, press the "ENTER" key.
5. 5
   Enter the "PIN code" to learn the first key.

   

   

6. 6
   Press the SSB with the smart key within 5 seconds after pressing "OK".

   

7. 7
   Confirm the message "First key learning completed".

   

8. 8
   Press the SSB with the smart key within 5 seconds after pressing "OK".

   

9. 9
   Confirm the message "Second key learning completed".

   

10. 10
    The screen will then be displayed as shown below when the key learning process is completed.