Propeller Shaft and Axle (2WD-FF)
Specifications
In this manual: Propeller Shaft and Axle (2WD-FF)
~3min read
Specification
| Items | Connection Type | |||
| Outer side | Inner side | |||
| Front Driveshaft | GAMMA 1.6 | Connection Type | Pinion # 24 | CTJ # 24 |
| Max. Allowable Angle | 46,5° | 23° | ||
| Rear Differential | Oil Type | Hypoid Gear Oil MS MS 517-15 GT 75W/90 (GL-5) (SHELL HD AXLE OIL 75W90), Equivalent SK HK G-5 75W90 | ||
| Oil Capacity | 0,5 ± 0.1 L | |||
| Gear Type | Hypoid | |||
| Differential Gear Ratio | 2,533 | |||
| Hypoid Gear Backlash | 0.07–0.15 mm (0.0028–0.0059 in.) | |||
| Differential Gear Backlash | 0.01–0.06 mm (0.0004–0.0024 in.) | |||
Tightening Torque
| Item | N·m | kgf·m | lb-ft | ||
| Front | Hub Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 | |
| Drive Shaft Seal Nut | 274,6 - 294,2 | 28,0 - 30,0 | 202,5 - 217,0 | ||
| Strut Assembly with Steering Knuckle | 137,3 - 156,9 | 14,0 - 16,0 | 101,3 - 115,7 | ||
| Front Caliper to Knuckle | 78,5 - 98,1 | 8,0 - 10,0 | 57,9 - 72,3 | ||
| Inner Shaft Bearing Bracket Bolt | 39,2 - 63,7 | 4,0 - 6,5 | 28,9 - 47,0 | ||
| Wheel speed sensor mounting bolt | 7,8 - 11,8 | 0,8 - 1,2 | 5,8 - 8,7 | ||
| Brake Disc Mounting Screw | 4,9 - 5,9 | 0,5 - 0,6 | 3,6 - 4,3 | ||
| Lower Arm Ball Joint | 58,8 - 70,6 | 6,0 - 7,2 | 43,4 - 52,1 | ||
| Tie Rod End Castle Nut | 24,5 - 34,3 | 2,5 - 3,5 | 18,1 - 25,3 | ||
| Dust Cover Bolt | 3,9 - 5,9 | 0,4 - 0,6 | 2,9 - 4,3 | ||
| Hub Bearing Bolt | 78,5 - 98,1 | 8,0 - 10,0 | 57,9 - 72,3 | ||
| Rear | Wheel Hub Nut | 107,9 - 127,5 | 11,0 - 13,0 | 79,6 - 94,0 | |
| Propeller Shaft Castle Nut | 274,6 - 294,2 | 28,0 - 30,0 | 202,5 - 217,0 | ||
| Shock Absorber Lower Mounting Bolt and Nut | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 | ||
| Brake Caliper Mounting Bolt | 63,7 - 73,5 | 6,5 - 7,5 | 47,0 - 54,2 | ||
| Wheel speed sensor mounting bolt | 6,9 - 10,8 | 0,7 - 1,1 | 5,1–8,0 | ||
| Brake Disc Mounting Screw | 4,9 - 5,9 | 0,5 - 0,6 | 3,6 - 4,3 | ||
| Hub Assembly Mounting Bolt | 78,5 - 98,1 | 8,0 - 10,0 | 57,9 - 72,3 | ||
| Upper Arm Bolt and Nut | 137,3 - 156,9 | 14,0 - 16,0 | 101,3 - 115,7 | ||
| Lower Arm Bolt and Nut | 137,3 - 156,9 | 14,0 - 16,0 | 101,3 - 115,7 | ||
| Auxiliary Arm Bolt | 137,3 - 156,9 | 14,0 - 16,0 | 101,3 - 115,7 | ||
| Trailing Arm Bolt (Body) | 98,1 - 117,7 | 10,0 - 12,0 | 72,3 - 86,8 | ||
| Trailing Arm Bolt (Carrier) | 137,3 - 156,9 | 14,0 - 16,0 | 101,3 - 115,7 | ||
| Propeller Shaft | Front Propeller Shaft Bolt (Transfer Case Assembly) | 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 | |
| Propeller Shaft Center Bearing Bracket Mounting Bolt | 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 | ||
| Front Propeller Shaft Bolt (Rear Differential) | 49,0 - 63,7 | 5,0 - 6,5 | 36,2 - 47,0 | ||
| Rear Differential | Rear Differential Mounting Bolt | 68,6 - 88,3 | 7,0 - 9,0 | 50,6 - 65,1 | |
| Drive Pinion Lock Nut | 186,3 - 441,3 | 19,0 - 45,0 | 137,4 - 325,5 | ||
| Differential Cover Bolt | 39,2 - 49,0 | 4,0–5,0 | 28,9 - 36,2 | ||
| Rear Differential Drain Plug | 39,2 - 49,0 | 5,0–7,0 | 28,9 - 36,2 | ||
| Rear Differential Filler Plug | 39,2 - 58,8 | 4,0–6,0 | 28,9 - 43,3 | ||
| Rear Differential Carrier ↔ Coupling Assembly Bolt | 39,2 - 58,8 | 5,8 - 6,6 | 28,9 - 43,3 | ||
Lubricants
| Engine | Connection Type | Lubricants | Quantity | ||
| Gamma 1.6 T-GDi | Pinion | RBA | 100 g + 10 g | ||
| TJ | CW-13TJ | 130 g + 10 g | |||
Test yourself
A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?