Body Electrical System

Start/Stop Button Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the emergency pad lower panel. (Refer to Body - "Emergency Pad Lower Panel")
  3. Remove the Start/Stop button (B) after disconnecting the Start/Stop button connector (A).

Installation

  1. Install the Start/Stop button.
  2. Remove the side panel of the emergency indicator panel (right).
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.