Hyundai Kona Quiz
Body (Interior and Exterior)

Sunroof Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
7steps
~42min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. Remove the headliner. (Refer to Headliner - "Headliner Assembly")
  2. Remove the sunroof glass. (Refer to Sunroof - "Sunroof Glass")
  3. Loosen the retaining screws, then remove the sunroof motor (A).
  4. After loosening the mounting bolts, remove the assist grip bracket (A).
  5. Disconnect the drain tubes (B).
  6. After loosening the mounting nuts and bolts, remove the sunroof assembly (A). Tightening torque: Bolt: 7.8–11.8 N·m Nut: 3.9–5.9 N·m
  7. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.