Body Electrical System

Park Assist Sensor

7steps
~42min
2/5difficulty
Done 0 of 7

Components and Component Location

Assembly

Repair Procedures

DEPOSIT

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear/front bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover")
  3. Disconnect the connector (B) from the parking assist sensor (A).
  4. Remove the sensor (A) by pulling both ends of the sensor bracket (B).

REMEDY

  1. Install the rear ultrasonic sensor after connecting the connector.
  2. Install the bumper cover.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.