Body Electrical System

Repair Procedures

4steps
~24min
2/5difficulty
Done 0 of 4

DEPOSIT

  1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
  2. After removing the lower horn mounting bolt (A) and horn (B), disconnect the connector (C) and remove the horn.

REMEDY

  1. After connecting the horn connectors, install the horn assembly and tighten.
  2. Install the front bumper cover.

Inspection

  1. The horn relay of this vehicle is located in the PCB of the relay block in the engine compartment.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.