Hyundai Tucson LM Quiz
Engine Electrical System

Ignition Coil Repair Procedures

In this manual: Engine Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connectors (A).
    • When disconnecting the ignition coil connector, pull the lock pin (A) and press the clip (B).
  4. Remove the ignition coil (A).

Installation

  1. Install in the reverse order of removal. Ignition coil bolts: 9.8 ~ 11.8 N·m

Inspection

  1. Measure the primary coil resistance between terminals (+) and (-).

    Standard value: 0.75 x ± 15%

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.