Emission Control System
Repair Procedures
In this manual: Emission Control System
4steps
~24min
2/5difficulty
Done 0 of 4
Inspection
- Disconnect the vapor hose from the PCV valve, then remove the PCV valve.
- Reconnect the PCV valve to the vapor hose.
- Run the engine at idle, then place your finger over the open end of the PCV valve and check that vacuum is felt in the intake manifold.

- The piston inside the PCV valve will move back and forth due to the vacuum.

- If vacuum is not felt, check the operation of the PCV valve. If it operates properly, clean or replace the vapor hose.
Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?