Jeep Liberty Quiz
Things To Know Before Starting Your Vehicle

Flash Lights With Lock

In this manual: Things To Know Before Starting Your Vehicle
Introduction — 7Things To Know Before Starting Your Vehicle — 101Understanding The Features Of Your Vehicle — 186Understanding Your Instrument Panel — 117Starting And Operating — 111What To Do In Emergencies — 19Maintaining Your Vehicle — 79Maintenance Schedules — 3If You Need Consumer Assistance — 21
~1min read

The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter.

This feature can be turned on or turned off. To change the current setting, proceed as follows:

• For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.

• For vehicles not equipped with the EVIC, perform the following steps:

1. Press and hold the UNLOCK button on a programmed (i.e., functional) RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button.

2. Release both buttons at the same time.

3. Test the feature from outside the vehicle by pressing the LOCK and UNLOCK buttons on the RKE transmitter.

4. Repeat these steps if you want to return this feature to its previous setting.

Test yourself

A quick Jeep Liberty quiz: every answer comes with an explanation and a link to the manual page.