Jeep Liberty Quiz
Maintaining Your Vehicle

Rear Tail/Stop, Turn Signal, And Back-Up Lamp

In this manual: Maintaining Your Vehicle
Introduction — 7Things To Know Before Starting Your Vehicle — 101Understanding The Features Of Your Vehicle — 186Understanding Your Instrument Panel — 117Starting And Operating — 111What To Do In Emergencies — 19Maintaining Your Vehicle — 79Maintenance Schedules — 3If You Need Consumer Assistance — 21
~1min read

1. Open the liftgate.

2. Remove the screws that fasten the taillamp housing to the vehicle.

3. Pull the taillamp housing straight back to separate it

3. Pull the taillamp housing straight back to separate it from the vehicle.

4. Disconnect the electrical connector.

5. Remove the two screws that fasten the back plate to the taillamp housing.

6. Separate the back plate from the taillamp housing.

7. Pull the appropriate bulb(s) out of the back plate and insert the replacement bulb(s).

8. Install the back plate and screws into the taillamp housing.

9. Connect the electrical connector.

10. Install the taillamp housing and screws.

11. Close the liftgate.

Test yourself

A quick Jeep Liberty quiz: every answer comes with an explanation and a link to the manual page.