Jeep Wrangler Quiz

Removing The Rear Seat — Two-Door Models

In this manual: Removing The Rear Seat — Two-Door Models
Introduction — 0Things To Know Before Starting Your Vehicle — 0Understanding The Features Of Your Vehicle — 0Understanding Your Instrument Panel — 0Starting And Operating — 0What To Do In Emergencies — 0Maintaining Your Vehicle — 0Maintenance Schedules — 0If You Need Consumer Assistance — 0
~1min read

• Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.

• Be sure everyone in your vehicle is in a seat and using a seat belt properly.

• In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure that the seats are fully latched.

1. Fold the rear seat forward following steps 1 and 2 under “Fold And Tumble Rear Seat” in this section.

2. Press down on the release bar on each side, and pull the seat out and away from the lower bracket.

3. Remove the seat from the vehicle.

Release Bar Location
Release Bar Location

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.