Jeep Wrangler Quiz

Front Panel(s) Installation With Rear Hard Top Removed

In this manual: Front Panel(s) Installation With Rear Hard Top Removed
Introduction — 0Things To Know Before Starting Your Vehicle — 0Understanding The Features Of Your Vehicle — 0Understanding Your Instrument Panel — 0Starting And Operating — 0What To Do In Emergencies — 0Maintaining Your Vehicle — 0Maintenance Schedules — 0If You Need Consumer Assistance — 0
~1min read

1. Turn the left and right panels over and move the spacer block (located on the rear of the panel) upward 90 degrees.

NOTE: The front panel(s) must be positioned properly to ensure sealing. Set

2. Install the right panel first, then the left panel.

3. Reinstall the panel(s) using the same steps for removal in reverse order.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.