Jeep Wrangler Quiz

Rear Tail, Stop, Turn Signal, And Backup Lamp

In this manual: Rear Tail, Stop, Turn Signal, And Backup Lamp
Introduction — 0Things To Know Before Starting Your Vehicle — 0Understanding The Features Of Your Vehicle — 0Understanding Your Instrument Panel — 0Starting And Operating — 0What To Do In Emergencies — 0Maintaining Your Vehicle — 0Maintenance Schedules — 0If You Need Consumer Assistance — 0
~1min read

1. Remove the two inboard screws attaching the tail light housing to the body. DO NOT REMOVE THE OUTER SCREWS AT ANY TIME.

2. Separate the housing from the body by pushing the lamp inboard while pulling

2. Separate the housing from the body by pushing the lamp inboard while pulling the lamp away from the body.

3. Rotate the appropriate socket 1/4 turn counterclockwise, then remove it from the housing.

4. Pull the bulb straight from the socket to replace.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.