Suspension
Compression Damping Force Adjustment
In this manual: Suspension
~1min read
There are two adjustments you can make to the compression damping force.
High Speed Compression Damping Adjuster [A] Low Speed Compression Damping Adjuster [B]
- To adjust the high speed compression damping force, turn the outside damping adjuster with a wrench to the desired position.
The standard adjuster setting is the 1 3/4 turns out from the fully clockwise position.
High Speed Compression Damping Force Adjustment 
NOTE
When turning the high speed compression damping force adjuster (outside), turn the low speed compression damping force adjuster (inside) too. But, the low speed compression damping force (setting position) dose not change.
- To adjust the low speed compression damping force, turn the inside damping adjuster with a flat-head screwdriver to the desired position.
The standard adjuster setting is the 1 3/4 turns out from the fully clockwise position.
Low Speed Compression Damping Force Adjustment 
Test yourself
A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?