Engine Sprocket Removal

• Remove: Engine Sprocket Cover Bolts [A] Engine Sprocket Cover [B]

• Flatten out the bended washer [A].
• Remove the engine sprocket nut [B] and washer.

NOTE

When loosening the engine sprocket nut, hold the rear brake on.

• Raise the rear wheel off the ground with the stand.
• Loosen the drive chain (see Drive Chain Slack Adjustment in the Periodic Maintenance chapter).
• Pull the engine sprocket [A] with drive chain [B] off the output shaft [C].
• Disengage the drive chain from the engine sprocket.