Kawasaki Ninja ZX-10R Quiz
General Information

Oil Seal, Grease Seal

In this manual: General Information
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read

Do not remove pressed oil or grease seals unless removal is necessary. Replace with new ones whenever removed.

Press new oil seals with manufacture and size marks facing out. Make sure the seal is aligned properly when installing.

Oil Seal, Grease Seal

Apply specified grease to the lip of seal before installing the seal.

Oil Seal, Grease Seal

Circlips, Cotter Pins

Replace the circlips or cotter pins that were removed with new ones. Take care not to open the clip excessively when installing to prevent deformation.

Circlips, Cotter Pins

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.