Cooling System

Thermostat Removal

~1min read
  • Remove: Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter) Air Cleaner Housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter) Throttle Body Assy (see Throttle Body Assy Removal in the Fuel System (DFI) chapter) Throttle Body Assy Holder Clamp [A] Water Temperature Sensor Connector [B] (Disconnect)
  • Roll up the heat insulation rubber plate [D].
Thermostat Removal

  • Remove: Bolt [A] Clutch Cable Lower End [B] Radiator Hose End [C] (Disconnect)
Thermostat Removal

  • Remove: Air Bleeder Hose End [A] (Disconnect) Thermostat Housing Mounting Bolts [B] Thermostat Assembly [C]
Thermostat Removal

  • Remove: Thermostat Cap Bolts [A] Thermostat Cap [B] and Housing [C] Thermostat [D] O-rings [E]
Thermostat Removal

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.