Water Pump Housing Assembly

NOTICE

Do not reuse the mechanical seal and oil seal.

• Apply high-temperature grease to the new oil seal lips [A].
• Press the new oil seal into the housing with a bearing driver [B] until it stops at the bottom surface [C] of the housing.

Special Tool - Bearing Driver Set: 57001-1129

NOTICE

Be careful not to damage the sealing surface of the mechanical seal.

• Press the new mechanical seal into the housing with the oil seal driver [A] until its flange [B] touches the surface [C] of the housing.

Special Tool - Oil Seal Driver 37.5: 57001-1660