Kia Cadenza VG Owner's Manual Quiz
Heating, Ventilation, and Air Conditioning

Blower Resistor Repair Procedure

In this manual: Heating, Ventilation, and Air Conditioning
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
Done 0 of 7

Inspection

  1. Measure the resistance between the blower resistor terminals.
  2. If the measured resistance does not meet the specification, the blower resistor must be replaced.

Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower airbag cover (A) and disconnect the connector (B).
  3. Remove the shower duct (A).
  4. Disconnect the power MOSFET connector (A), then remove the power resistor (B) after loosening the mounting screws.
  5. Installation is the reverse of removal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.