Repair Procedures

Inspection

1. 1
   Turn the steering wheel so that the front wheels point straight ahead.
2. 2
   Measure the distance the steering wheel can be turned without moving the front wheels.

   Standard value: 30 mm (1.1811 in.) or less

   

3. 3
   If the play exceeds the standard value, inspect the steering column, shaft, and linkage.
4. 4
   Place the vehicle on a level surface and set the steering wheel to the straight-ahead position.
5. 5
   Attach a spring scale to the steering wheel. With the engine running at 900 to 1100 rpm, pull the scale and read it as soon as the tires begin to turn.

   Standard value: 3.0 kgf or less

   

6. 6
   If the measured value exceeds the standard value, inspect the power steering gear and the MDPS system.