Drive Shaft and Axle
Specifications
In this manual: Drive Shaft and Axle
~2min read
Specification
| Engine and T/M | Connection Type | Max. Allowable Angle | ||
| Inner | Outer | Inner | Outer | |
| Lambda 3.3 GDI | VTJ #25 | Minet #26 | 21° | 46,5° |
Tightening Torque
| Item | N·m | kgf·m | lb-ft | |
| Front | Hex Nut | 88,2 ~ 107,8 | 9,0 ~ 11,0 | 65,0 ~ 79,5 |
| Drive Shaft Axle Nut | 274,6 ~ 294,2 | 28,0 ~ 30,0 | 202,5 ~ 217,0 | |
| Strut Assembly Lower Mounting Bolt | 196,1 ~ 215,7 | 20,0 ~ 22,0 | 144,7 ~ 159,1 | |
| Brake Caliper Mounting Bolt | 78,4 ~ 98,0 | 8,0 ~ 10,0 | 57,8 ~ 72,3 | |
| Wheel speed sensor mounting bolt | 6,8 ~ 9,8 | 0,7 ~ 1,0 | 5,0 ~ 7,2 | |
| Brake disc mounting bolt | 4,9 ~ 5,8 | 0,5 ~ 0,6 | 3,6 ~ 4,3 | |
| Lower Ball Joint Mounting Bolt | 98,0 ~ 117,6 | 10,0 ~ 12,0 | 72,3 ~ 86,7 | |
| Tie Rod End Ball Joint Nut | 34,3 ~ 44,0 | 3,5 ~ 4,5 | 25,3 ~ 32,5 | |
| Rear | Hex Nut | 88,2 ~ 107,8 | 9,0 ~ 11,0 | 65,0 ~ 79,5 |
| Shock Absorber Upper Mounting Bolt | 49,0 ~ 63,7 | 5,0 ~ 6,5 | 36,2 ~ 47,0 | |
| Shock Absorber Lower Mounting Nut | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Brake Caliper Mounting Bolt | 78,4 ~ 98,0 | 8,0 ~ 10,0 | 57,8 ~ 72,3 | |
| Wheel speed sensor mounting bolt | 6,8 ~ 10,7 | 0,7 ~ 1,1 | 5,0 ~ 7,9 | |
| Brake disc mounting bolt | 4,9 ~ 5,8 | 0,5 ~ 0,6 | 3,6 ~ 4,3 | |
| Hub Assembly Mounting Bolt | 78,4 ~ 88,2 | 8,0 ~ 9,0 | 57,8 ~ 65,0 | |
| Upper Arm Ball Joint Mounting Nut | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Lower Arm Mounting Bolt | 137,2 ~ 156,9 | 14,0 ~ 16,0 | 101,2 ~ 115,7 | |
| Auxiliary Arm Ball Joint Mounting Nut | 78,5 ~ 88,3 | 8,0 ~ 9,0 | 57,9 ~ 65,1 | |
| Trailing Arm Mounting Bolt | 44,1 ~ 53,9 | 4,5 ~ 5,5 | 32,5 ~ 39,7 | |
Lubricants
| Engine and T/M | Connection Type | Lubricants | Quantity |
| Lambda 3.3 GDI | Minet #26 | RBA | 160 g |
| VTJ #25 | CW-13TJ | 170 g |
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?