Driver assistance guide

Junction Crossing function: (if equipped)

~2min read

The advanced Junction Crossing functional capabilities integrated into the comprehensive Forward Collision-Avoidance Assist architecture of your Kia EV2 comprise:

  • Collision Warning

  • Emergency Braking

  • Stopping vehicle and ending brake control

Collision Warning

Infotainment and cluster diagram illustrating junction crossing collision warning for the Kia EV2
  1. Collision Warning

Collision Warning can proactively alert you with the Forward Safety warning light blinking (Flashing forward safety indicator icon in the Kia EV2 cluster), a detailed warning message, an audible notification, and physical steering wheel vibration.

Collision Warning may be activated under the following precise conditions:

  • Your driving speed is 55 km/h or below.

  • The crossing vehicle speed is approximately 10-60km/h (6-37 mph).

  • The detected object enters the calibrated operating sensor range of the Forward Collision-Avoidance Assist system in your Kia EV2.

Emergency Braking

Dashboard layout displaying emergency braking procedures during intersection crossings in the Kia EV2
  1. Emergency Braking

Emergency Braking can alert you with the Forward Safety warning light blinking (Emergency warning active icon on the Kia EV2 display), a warning message, an audible warning, and steering wheel vibration. Brake assist may activate to help avoid a collision with a vehicle.

Emergency Braking may be activated in the following conditions:

  • Your driving speed is 55 km/h or below.

  • The crossing vehicle speed is approximately 10-40km/h (6-25 mph).

  • The object enters the operating range of the Forward Collision-Avoidance Assist.

  • When approaching a control target traveling at a slower speed than your vehicle.

  • When restarting after a stop, if your vehicle accelerates at a low speed of approximately 12 km/h or below, a collision warning or emergency braking will operate once per left and right side even if the controlled object is approaching faster than your vehicle, under the following condition:

    • Cross-traffic speed: approximately 18-90 km/h (11-56 mph)

Stopping vehicle and ending brake control

Driver safety instruction notice screen for the Kia EV2 after braking intervention
  1. Drive carefully

If Emergency Braking stops your vehicle, a warning message appears on the instrument cluster.

For safety purposes, you should immediately engage the brake pedal and check the vehicle’s surroundings.

Brake control ends approximately 2 seconds after Emergency Braking stops your vehicle.

CAUTION

If the angle of possible collision with the crossing vehicle is beyond a certain range, Junction Crossing warning and control may be late or may not operate.