Traffic change (For Europe)
The luminous intensity distribution emitted from standard low-beam headlights is asymmetrical by design. If you travel to a region or country with opposite traffic flow direction, this asymmetrical pattern can dazzle drivers of oncoming vehicles. To comply with ECE regulations and prevent blinding other motorists, various technical solutions are available, such as automatic system adjustments or specialized adhesive deflectors. Your Kia EV2 accommodates this requirement through an approved technical solution utilizing protective adhesive sheets applied directly to the headlight lenses.
To withstand severe thermal loads and environmental weather factors—including intense headlight heat, solar UV radiation, and moisture from rain—properly adhere the specialized film to your Kia EV2 headlights as illustrated below:
![]() |
![]() |
![]() |
![]() |
Thoroughly clean all foreign debris, dust, and oily residues from the exterior headlight lens surfaces. Ensure the application areas are completely clean and dry before proceeding.
Prepare two precise adhesive sheets trimmed exactly to the required dimension specifications for your Kia EV2.
Length: 24 mm (0.9 inches)
Width: 46 mm (1.8 inches)
Carefully apply and press the prepared adhesive sheets onto both headlight assemblies according to the reference guides.
Always use genuine, specified adhesive sheets designed for your vehicle. Utilizing unapproved or generic alternative materials may lead to premature detachment, thermal deformation, or permanent surface damage caused by continuous heat, ultraviolet exposure, or moisture.



