Body Electrical System

Description and operating principle

16steps
~96min
4/5difficulty
Done 0 of 16

Description and Operation

Wireless Power Charger System

During ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone.

Mobile phones certified with the wireless charging standard WPC (Qi 1.1.2) or equipped with an exclusive wireless charging case can be used.

Wireless Power Charging System Flow Chart

  1. Supply vehicle power.

  2. Convert to AC. Generate electromagnetic field in 1st coil.

  3. Generate induced current in power receiver from electromagnetic induction.

  4. Generate AC in 2nd coil.

  5. Convert to DC.

  6. Charge battery.

System Configuration Diagram

  1. Instrument cluster : Alerts about contact with mobile phone

  2. BCM unit : Determines contact with mobile phone

  3. Wireless charging lamp : Displays the charging status

  4. SMK unit : Stops charging during the activation of LF

Major Functions of Wireless Power Charger System

  1. Charging Function

    1. Activation method

      a.

      Close all doors of the car.

      b.

      Switch vehicle power to ACC or IG ON.

      c.

      Place the wireless charging-enabled mobile phone on the tray.

    2. Charging status display

      Mode Charging LED display Remarks
      Stand by for charging LED turned OFF
      Charging in process Amber LED turned ON
      Charging completed Green LED turned ON
      Charging error Amber LED blinks
      • Blinks 10 times for 10 seconds, then LED is turned off for 50 seconds (total 60 seconds)

  2. Alert for contact with mobile phone

    1. Activation method

      a.

      Key OFF while the mobile phone is being charged.

      b.

      Checks if the mobile phone is placed on the wireless charging unit.

      c.

      Alert message for contact with mobile phone is displayed on the instrument panel (for about 4 - 5 seconds).

  3. Overheating prevention

    1. Activation method

      a.

      If the thermistor temperature inside the wireless charging module rises above a certain level (158 °F (70 °C)), charging will stop to protect the mobile phone battery.

      b.

      If the thermistor temperature falls below a certain level (149 °F (65 °C)), charging will restart.

  4. Foreign matter detection

    1. Charging will be stopped if there is a coin or other metallic object between the wireless charging unit and the mobile phone.

      [Foreign matter]

    2. After the system has detected foreign matter and stopped charging the mobile phone, the charging will resume in about 60 seconds once the foreign matter has been removed.

  5. SMK unit LF frequency interference prevention

    This function prevents interference between the wireless charging frequency and smart key unit frequency band.

    1. Wireless charging is stopped when the door is open or the SMK unit is in LF mode (searching for smart key).

      e.g. Wireless charging function is stopped if the driver carries the smart key out of the vehicle during IG ON.

    2. It will return to normal operating status when the LF mode of the SMK unit is completed.

  6. Turn the wireless charging function ON/OFF with USM.

    ? Tailgate applies to RV vehicle models.

Protection of Wireless Power Charger System

Item Condition Status
Protects against low/high voltage Protects and stops charging under 7.0 V and over 16.5 V LED OFF
(Stops operation)
Charges over 7.5 V and under 16.0 V
Protects against reverse voltage Protects and stops charging in case of reverse voltage LED OFF
(Stops operation)
Protects against overcurrent Protects and stops charging in case of detecting 4.5 A Amber LED blinks
Protects against overheating Protects and stops charging in case of detecting 158°F (70°C) by internal temperature sensor of wireless charging module Amber LED blinks
Resumes under 149°F (65°C)
Foreign matter
(Coins, clips, precious metals, etc.)
Protects and stops charging in case of detecting foreign matter (overheating prevention) Amber LED blinks
Prevents frequency interference Protects and stops charging by activating SMK in case door or tailgate is open LED OFF
(Stops operation)
Resumes in 3.5 seconds after all doors and tailgate are closed and SMK operation is completed
Alert for contact with mobile phone During key-off with contact with mobile phone Displays warning message on the instrument panel (for about 4-5 seconds)

? Tailgate applies to RV vehicle models.