Body Electrical System
Headlamp Leveling Switch Repair procedures
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Removal
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
Remove the crash pad plate [LH] (A) after loosening the screws.

Disconnect the crash pad side switch connector (A).

Remove the crash pad side switch (A) after loosening the screws.

Installation
Install the crash pad side switch.
Connect the crash pad side switch connector.
Install the crash pad plate [LH].
Install the crash pad lower panel.
Connect the negative (-) battery terminal.
Was this page helpful?