Body Electrical System

Immobilizer Control Unit Repair procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the main crash pad assembly.

    (Refer to Body - "Main Crash Pad Assembly")

  3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.

Installation

  1. Install the immobilizer control unit after connecting the unit connector.

  2. Install the main crash pad assembly.

  3. Connect the negative (-) battery terminal.