Body Electrical System

Lane Keeping Assist System (LKAS) Unit Repair procedures

8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Using a screwdriver or remover, remove the mirror wiring cover (A).

  3. Disconnect the LKAS unit connector (A).

  4. Remove the LKAS unit (B) by pulling out lock pins (A).

Installation

  1. Install the LKAS unit.

  2. Connect the LKAS unit connector.

  3. Install the mirror wiring cover.

  4. Connect the negative (-) battery terminal.