Driving your vehicle
Operating conditions
In this manual: Driving your vehicle
~1min read
- Go to the User Settings Mode → Driving Assist → Rear Collision Warning and select "Rear Cross Traffic Alert" on the LCD display. The system will turn on and stand by to be activated.
- Select Rear cross traffic alert again, to turn the system off.
- If the vehicle is turned off and on again, the Rear cross traffic alert system will return to the state right before the vehicle was turned off. Turn the Rear cross traffic alert system off when not in use.
- The system is operated when the vehicle speed is below 10 km/h with the shift lever in R (Reverse).
- The Rear cross traffic alert detection range is 0.5m~20m based on side direction. If an approaching vehicle speed is 4 km/h~36 km/h in detection range, The warning is on. However, the system sensing range is different based on conditions. Always pay attention to surrounding.
Was this page helpful?