Body Electrical System

Rain Sensor Repair procedures

6steps
~36min
3/5difficulty
Done 0 of 6

Removal

  1. Reomve the mirror wiring cover (A).

  2. Disconnect the rain sensor connector (A).

  3. Be careful not to damage the cover latch by applying excessive force. To remove the latch, pull aside the latch using the cover hole with a small flat-blade screwdriver (A).

  4. Rain sensor module is attached to the front windshield by glue. To replace the front windshield, remove the rain sensor module from the existing front windshield and install on the new front windshield.

Installation

  1. Install the rain sensor bracket to the windshield glass using the tape.

  2. Connect the rain sensor connector, and then install the sensor cover.