Body Electrical System
Rear Washer Motor Repair procedures
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Inspection
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Remove the front wheel guard [RH].
(Refer to Body - "Front Wheel Guard")
Connect positive (+) battery cables to terminal 3 and negative (-) battery cables to terminal 2 respectively.
Check that the motor operates normally and the washer motor runs and water sprays from the front nozzles.
If they are abnormal, replace the washer motor.
[Front & Rear washer]
No. Description 1 Front windshield washer (+) 2 Ground 3 Rear washer (+)

Was this page helpful?