Restraint

Repair procedures

~1min read

Component Replacement After Deployment

When the front airbag(s) deployed after a collision, replace the following items.

  • SRSCM

  • Deployed airbag(s)

  • Seat belt pretensioner(s)

  • Front impact sensors

  • SRS wiring harnesses

  • Inspect the clock spring for heat damage.

    If any damage found, replace the clock spring.

When the side/curtain airbag(s) deployed after a collision, replace the following items.

  • SRSCM

  • Deployed airbag(s)

  • Side impact sensor(s) for the deployed side(s)

  • SRS wiring harnesses

After the vehicle is completely repaired, confirm the SRS airbag system is OK.

  • Turn the ignition switch ON; the SRS indicator should come on for about six seconds and then go off.