Body Electrical System

Repair procedures

10steps
~60min
3/5difficulty
Done 0 of 10

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the tailgate trim.

    (Refer to Body - "Tailgate Trim")

  3. Remove the rear wiper motor.

    (Refer to Rear Wiper/Washer - "Rear Wiper Motor")

  4. Loosen the rear view camera mountiong nut (A).

  5. Remove the rear view camera assembly (B) after removing the rear view camera pad (A).

Installation

  1. Install the back view camera assembly.

  2. Install the back view camera pad.

  3. Install the rear wiper motor.

  4. Install the tailgate trim.

  5. Connect the negative (-) battery terminal.