Body Electrical System
Repair procedures
In this manual: Body Electrical System
4steps
~24min
2/5difficulty
Done 0 of 4
Removal
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
After loosening each mounting bolt of the low-pitch horn (A) and high-pitch horn (B), detach the connector (C) and remove the horn.


Installation
After connecting the horn connectors, install both high-pitch and low-pitch horns.
Install the front bumper cover.
Inspection
The relay on the horn of this vehicle is implanted into the metal core block PCB of the engine room relay block.
Was this page helpful?