Hybrid Motor System
Specifications
In this manual: Hybrid Motor System
~1min read
Specifications
Hybrid Drive Motor
| Item | Specification |
| Type | PMSM (Interior Permanent Magnet Synchronous Motor) |
| Max. output | 32 kW / 1,798 - 2,500 rpm |
| Max. torque | 170 N·m / 0 - 1,798 rpm |
| Cooling system | Water-cooled |
Hybrid Starter Generator (HSG)
| Item | Specification |
| Type | PMSM (Interior Permanent Magnet Synchronous Motor) |
| Max. output | 8.0 kW / 2,160 - 12,000 rpm |
| Max. torque | 35 N·m / 0 - 2,160 rpm |
| Cooling system | Water-cooled |
Electric Water Pump (EWP)
| Item | Specification |
| Type | Water pump |
| Operation | Motor drive |
| Voltage | 12 V |
| Rated currency | Below 2.8 A |
Coolant
| Item | Specification |
| Capacity | 2.8 L (0.74 U.S gal., 2.96 U.S.qt., 2.46 Imp.qt.) |
Tightening Torques
| Item | N·m | kgf·m | lb·ft |
| HPCU mounting bolt | 21.6 - 23.5 | 2.2 - 2.4 | 15.9 - 17.4 |
| DCT ↔ Hybrid drive motor mounting bolt | 42.2 - 53.9 | 4.3 - 5.5 | 31.1 - 39.8 |
| Engine clutch actuator mounting bolt | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| EWP mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| HSG mounting bolt | 44.1 - 49.0 | 4.5 - 5.0 | 32.5 - 36.2 |
| 55.9 - 60.8 | 5.7 - 6.2 | 41.2 - 44.8 | |
| Reservoir mounting bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 |
| Radiator mounting bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 |
Was this page helpful?