Engine Mechanical System
Specifications
In this manual: Engine Mechanical System
~10min read
Specifications
| Description |
Specifications | Limit | |
| General | |||
| Type | In-line, DOHC | ||
| Number of cylinders | 4 | ||
| Bore | 72.0 mm (2.8346 in.) | ||
| Stroke | 97.0 mm (3.8189 in.) | ||
| Total displacement | 1580 cc (96.42 cu.in.) | ||
| Compression ratio | 13.0 : 1 | ||
| Firing order | 1-3-4-2 | ||
| Valve timing | |||
| Intake valve | Open | ATDC 10° - BTDC 60° | |
| Close | ABDC 108.8° - ABDC 33.8° | ||
| Exhaust valve | Open | BBDC 50.2° - BBDC 10.2° | |
| Close | ATDC 3° - ATDC 43° | ||
| Camshaft | |||
| Cam height |
Intake | 36.42 mm (1.4339 in.) | |
| Exhaust | 36.15 mm (1.4232 in.) | ||
| Journal outer diameter | Intake | No.1 : 36.459 - 36.473 mm (1.43539 - 1.43594 in.) |
|
| No.2, 3, 4, 5 : 22.959 - 22.975 mm (0.90390 - 0.90453 in.) |
|||
| Exhaust | No.1 : 36.464 - 36.478 mm (1.43559 - 1.43614 in.) |
||
| No.2, 3, 4, 5 : 22.964 - 22.978 mm (0.90409 - 0.90465 in.) |
|||
| End play | 0.10 - 0.20 mm (0.0039 - 0.0079 in.) | ||
| Valve | |||
| Valve length | Intake | 100.94 mm (3.9740 in.) | 101.97 mm (4.0146 in.) |
| Exhaust | 101.09 mm (3.9799 in.) | 103.79 mm (4.0862 in.) | |
| Stem outer diameter | Intake | 5.465 - 5.480 mm (0.21516 - 0.21575 in.) | |
| Exhaust | 5.448 - 5.470 mm (0.21449 - 0.21535 in.) | ||
| Face angle | 45.25° - 45.75° | ||
| Thickness of valve head (margin) |
Intake | 1.35 - 1.65 mm (0.0531 - 0.0650 in.) | |
| Exhaust | 1.60 - 1.90 mm (0.0630 - 0.0748 in.) | ||
| Valve stem to valve guide clearance | Intake | 0.020 - 0.047 mm (0.00079 - 0.00185 in.) | |
| Exhaust | 0.030 - 0.064 mm (0.00118 - 0.00252 in.) | ||
| Valve guide | |||
| Length | Intake | 45.8 - 46.2 mm (1.8031 - 1.8189 in.) | |
| Exhaust | 45.8 - 46.2 mm (1.8031 - 1.8189 in.) | ||
| Valve spring | |||
| Free length | 50.27 mm (1.9791 in.) | ||
| Load | 16.4 ± 0.8 kgf·m / 35.5 mm (36.16 ± 1.76 lb·f / 1.3976 in.) 26.0 ± 0.9 kgf·m / 22.7 mm (57.32 ± 1.98 lb·f / 0.8937 in.) |
||
| Out of squareness | Less than 1.5° | ||
| Cylinder head | |||
| Flatness of gasket surface | Less than 0.05 mm (0.0020 in.) for total area | ||
| Less than 0.02 mm (0.0008 in.) for a section of 100 mm (3.9370 in.) × 100 mm (3.9370 in.) | |||
| Flatness of manifold mounting surface | Intake | Less than 0.10 mm (0.0039 in.) | |
| Exhaust | Less than 0.10 mm (0.0039 in.) | ||
| Piston | |||
| Piston outer diameter | 71.965 - 71.995 mm (2.8333 - 2.8344 in.) | ||
| Piston to cylinder clearance | 0.025 - 0.045 mm (0.0010 - 0.0018 in.) | ||
| Ring groove width | No. 1 ring | 1.035 - 1.050 mm (0.04075 - 0.04134 in.) | |
| No. 2 ring | 1.230 - 1.250 mm (0.04843 - 0.04921 in.) | ||
| Oil ring | 2.010 - 2.025 mm (0.07913 - 0.07972 in.) | ||
| Piston ring | |||
| Side clearance | No. 1 ring | 0.050 - 0.080 mm (0.00197 - 0.00315 in.) | |
| No. 2 ring | 0.040 - 0.080 mm (0.00157 - 0.00315 in.) | ||
| Oil ring | 0.050 - 0.125 mm (0.00197 - 0.00492 in.) | ||
| End gap | No. 1 ring | 0.13 - 0.18 mm (0.0051 - 0.0071 in.) | |
| No. 2 ring | 0.25 - 0.40 mm (0.0098 - 0.0157 in.) | ||
| Oil ring | 0.10 - 0.40 mm (0.0039 - 0.0157 in.) | ||
| Piston pin | |||
| Piston pin outer diameter | 17.997 - 18.000 mm (0.70854 - 0.70866 in.) | ||
| Piston pin hole inner diameter | 18.005 - 18.009 mm (0.70885 - 0.70902 in.) | ||
| Piston pin hole clearance | 0.005 - 0.012 mm (0.00020 - 0.00047 in.) | ||
| Connecting rod small end hole inner diameter | 18.005 - 18.011 mm (0.70885 - 0.70909 in.) | ||
| Piston pin-to-connecting rod bushing oil clearance | 0.005 - 0.014 mm (0.00020 - 0.00055 in.) | ||
| Connecting rod | |||
| Connecting rod big end inner diameter | 42.000 - 42.018 mm (1.65354 - 1.65425 in.) | ||
| Connecting rod bearing oil clearance | 0.018 - 0.036 mm (0.0007 - 0.0014 in.) | ||
| Side clearance | 0.10 - 0.25 mm (0.0039 - 0.0098 in.) | ||
| Crankshaft | |||
| Main journal outer diameter | 47.942 - 47.960 mm (1.88748 - 1.88819 in.) | ||
| Pin journal outer diameter | 38.954 - 38.972 mm (1.53362 - 1.53433 in.) | ||
| Main bearing oil clearance | 0.006 - 0.024 mm (0.00024 - 0.00094 in.) | ||
| End play | 0.07 - 0.25 mm (0.0028 - 0.0098 in.) | ||
| Cylinder block | |||
| Cylinder bore | 72.00 - 72.03 mm (2.8346 - 2.8358 in.) | ||
| Flatness of gasket surface | Less than 0.05 mm (0.0020 in.) for total area | ||
| Less than 0.02 mm (0.0008 in.) for a section of 100 mm (3.9370 in.) × 100 mm (3.9370 in.) | |||
| Engine oil | |||
| Oil quantity | Total | 4.1 L (1.08 U.S.gal., 4.33 U.S.qt., 3.61 lmp.qt.) | When replacing a short engine or block assembly |
| Oil pan | 3.4 L (0.90 U.S.gal., 3.59 U.S.qt., 2.99 lmp.qt.) | ||
| Drain and refill | 3.8 L (1.00 U.S.gal., 4.02 U.S.qt., 3.34 lmp.qt.) | Including oil filter | |
| Oil grade | Recommended | ACEA A5 or above | |
| Allowed | - API SL or above - ILSAC GF - 3 or above - ACEA A3 or above - For information on SAE viscosity grades based on ambient temperatures, refer to the “Lubrication System”. |
Usable if the recommended engine oil is not available | |
| Oil pressure (at 1,000rpm) | 98.07 kPa (1.0 kgf/cm², 14.22 psi) or above | Oil temperature (oil pan): 110±2 °C | |
| 2 Step relief variable oil pump (Rotor type) | |||
| Relief valve opening pressure | Primary : 210.84 - 279.49 kPa (2.15 - 2.85 kgf/cm², 30.58 - 40.54 psi) Secondary : 441.30 - 539.37 kPa (4.50 - 5.50 kgf/cm², 64.01 - 78.23 psi) |
||
| Side clearance | 0.040 - 0.090 mm (0.00157 - 0.00354 in.) | ||
| Body clearance | 0.150 - 0.242 mm (0.0059 - 0.0095 in.) | ||
| Guide clearance | 0.030 - 0.075 mm (0.00118 - 0.00295 in.) | ||
| Cooling system | |||
| Cooling method | Forced circulation with cooling fan | ||
| Coolant quantity | Approx. 5.8 L (1.53 U.S.gal., 6.13 U.S.qt., 5.10 lmp.qt.) | ||
| Thermostat | Type | Wax pellet type | |
| Opening temperature | 88 ± 1,5 °C | ||
| Full opening valve lift / temperature | More than 8 mm (0.3 in.) / 100 °C | ||
Liquid Gasket
| Location | Product | |
| Mating surface of timing chain cover | Threebond 1217H or equivalent | |
| Front area of mating surface between cam carrier and cylinder head | ||
| Front area of mating surface between cylinder block and head | ||
| Upper area of mating surface between timing chain cover and cam carrier | ||
| Front upper area of cylinder block | ||
| Front upper area of cylinder head gasket | ||
| Lower area of cam carrier | ||
| Lower area of cylinder block | ||
| Mating surface of oil pan | ||
Tightening Torques
| Item | N·m | kgf·m | lb·ft | |
| Engine mounting | ||||
| Engine mounting bracket to body fixing bolt | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 | |
| Engine mounting support bracket to engine mounting insulator fixing nut | 88.3 - 107.9 | 9.0 - 11.0 | 65.1 - 79.6 | |
| Engine mounting support bracket to engine support bracket fixing bolt | 58.8 - 73.5 | 6.0 - 7.5 | 43.4 - 54.2 | |
| Engine mounting support bracket to engine support bracket fixing nut | 58.8 - 73.5 | 6.0 - 7.5 | 43.4 - 54.2 | |
| Transaxle mounting bracket to body fixing bolt | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 | |
| Transaxle mounting support bracket to transaxle mounting insulator fixing bolt | 107.9 - 127.5 | 11.0 - 13.0 | 79.6 - 94.0 | |
| Roll rod bracket to sub frame fixing bolt | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 | |
| Roll rod bracket to roll rod support bracket fixing bolt & nut | 107.9 - 127.5 | 11.0 - 13.0 | 79.6 - 94.0 | |
| Drive belt system | ||||
| Hydraulic tensioner | 27.5 - 31.4 | 2.8 - 3.2 | 20.3 - 23.1 | |
| Mechanical tensioner | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Idler | 39.2 - 49.0 | 4.0 - 5.0 | 28.9 - 36.2 | |
| Crankshaft pulley bolt | [64.7 - 71.6] + [39 - 41°] | [6.6 - 7.3] + [39 - 41°] | [47.7 - 52.8] + [39 - 41°] | |
| Timing system | ||||
| Timing chain cover bolt | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Timing chain tensioner bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Timing chain tensioner arm bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Timing chain cam guide bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Timing chain guide bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Cylinder head | ||||
| Ignition coil bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Cylinder head cover bolt | [3.9 - 5.9] + [7.8 - 9.8] | [0.4 - 0.6] + [0.8 - 1.0] | [2.9 - 4.3] + [5.8 - 7.2] | |
| Intake CVVT OCV bolt | [47.1 - 52.0] + [25 - 31°] | [4.8 - 5.3] + [25 - 31°] | [34.7 - 52.0] + [25 - 31°] | |
| Exhaust CVVT bolt | 63.7 - 73.5 | 6.5 - 7.5 | 47.0 - 54.2 | |
| Camshaft bearing cap bolt (M6) | 11.8 - 13.7 | 1.2 - 1.4 | 8.7 - 10.1 | |
| Camshaft bearing cap bolt (M8) | 18.6 - 22.6 | 1.9 - 2.3 | 13.7 - 16.6 | |
| Cylinder head bolt | [12.7 - 16.7] + [120 - 125°] + [120 - 125°] | [1.3 - 1.7] + [120 125°] + [120 - 125°] | [9.4 - 16.7] + [120 - 125°] + [120 - 125°] | |
| Cylinder block | ||||
| Fly wheel bolt | 78.5 - 88.3 | 8.0 - 9.0 | 57.9 - 65.1 | |
| Connecting rod bearing cap bolt | [10.8 - 14.7] + [88 - 92°] | [1.1 - 1.5] + [88 - 92°] | [8.0 - 10.8] + [88 - 92°] | |
| Main bearing cap bolt | [17.7 - 21.6] + [88 - 92°] | [1.8 - 2.2] + [88 - 92°] | [13.0 - 15.9] + [88 - 92°] | |
| Ladder frame | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Lubrication system | ||||
| Oil drain plug | 34.3 - 44.1 | 3.5 - 4.5 | 25.3 - 32.5 | |
| Oil filter | 11.8 - 15.7 | 1.2 - 1.6 | 8.7 - 11.6 | |
| Oil pan bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Oil screen bolt | 24.5 - 31.4 | 2.5 - 3.2 | 18.1 - 23.1 | |
| Oil pump cover | 5.9 - 8.8 | 0.6 - 0.9 | 4.3 - 6.5 | |
| Oil pressure switch | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Cooling system | ||||
| Water pump pulley bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
| Water pump bolt | 7.8 - 11.8 | 0.8 - 1.2 | 5.8 - 8.7 | |
| Water inlet fitting nut | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Water temperature control assembly bolt & nut | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Heater pipe bolt | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Intake and exhaust system | ||||
| Air intake hose clamp bolt | 2.9 - 4.9 | 0.3 - 0.5 | 2.2 - 3.6 | |
| Air cleaner assembly bolt | 3.9 - 5.9 | 0.4 - 0.6 | 2.9 - 4.3 | |
| Intake manifold stay bolt | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Intake manifold bolt | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Intake manifold nut | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| EGR cooler bolt | 18.6 - 23.5 | 1.9 - 2.4 | 13.7 - 17.4 | |
| Exhaust manifold heat protector bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 | |
| Exhaust manifold stay bolt | 39.2 - 49.0 | 4.0 - 5.0 | 28.9 - 36.2 | |
| Exhaust manifold nut | 34.3 - 39.2 | 3.5 - 4.0 | 25.3 - 28.9 | |
| Muffler nut | 39.2 - 58.8 | 4.0 - 6.0 | 28.9 - 43.4 | |
Was this page helpful?