Maintenance

Tire (pressure & tread wear) Repair procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

  1. Check the tire pressure.

    16(inch) : 230 kPa (33 psi)

    18(inch) : 230 kPa (33 psi)

Tire Rotation

Checking For Pull And Wander

If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.

  1. Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability.

  2. If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again.

  3. If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test.

  4. If the steering continues to pull to the opposite side, replace the front wheels with new ones.

Tire Wear

  1. Measure the tread depth of the tires.

    Tread depth [limit] : 1.6 mm (0.0630 in.)

  2. If the remaining tread depth (A) is less than the limit, replace the tire.