Kia Sorento Owner's Manual Quiz
Kia Sorento XM 2011-2023 Repair Manual

Rear Seat Belt Replacement

In this manual: Kia Sorento XM 2011-2023 Repair Manual
Kia Sorento XM Owner's Manual. — 168Kia Sorento XM 2011-2023 Repair Manual — 1285
46steps
~276min
5/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 46
Second Row Seat Belt Replacement
  1. Remove the second row seat assembly.
  2. Remove the third row seat assembly.
  3. Remove the rear door sill trim.
  4. Remove the luggage compartment trim (A).
  5. Remove the luggage compartment partition trim (A).
  6. Loosen the mounting screws, then remove the rear cross trim (A).
  7. Loosen the mounting bolt, then remove the second row lower seat belt anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  8. Loosen the mounting bolt, then remove the third row seat belt lower anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  9. Loosen the mounting screws, then remove the luggage side trim (A).
  10. Loosen the mounting bolt, then remove the rear pillar garnish (A).
  11. Loosen the mounting bolt, then remove the second row upper seat belt anchor (A).
  12. Loosen the mounting bolt, then remove the second row seat belt retractor (B).

    Tightening torque: 39.2 ~ 54 N·m

  13. Install in the reverse order of removal.
  14. Remove the second row rear seat trim [LH].
  15. Loosen the lower anchor bolt of the second row center seat belt (A).

    Tightening torque: 39.2 ~ 54 N·m

  16. Loosen the mounting nut (B), then remove the second row center seat belt retractor (A).

    Tightening torque: 39.2 ~ 54 N·m

  17. Install in the reverse order of removal.
Second Row Center Seat Belt Pretensioner Replacement / Second Row Seat Belt Buckle Assembly Replacement
  1. Position the second row seat assembly [LH] rearward and the second row seat assembly [RH] forward. (Refer to Rear Seat - Rear Seat Assembly)
  2. Separate the second row seat belt lock and the second row seat assembly [LH] by removing the mounting bolt (C).

(LH)

  1. Remove the second row seat assembly [LH]. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Loosen the mounting bolt (A), then remove the second row seat belt buckle [LH] (B).

    Tightening torque: 39.2 ~ 54 N·m

  3. Install in the reverse order of removal.

(Center)

  1. Remove the second row seat assembly [RH]. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Loosen the mounting nuts, then remove the second row center seat belt lock bracket (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. Install in the reverse order of removal.

(RH)

  1. Remove the second row seat assembly [RH]. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Loosen the mounting screw, then remove the rear seat. Inner cover of the screen (A).
  3. Loosen the mounting bolt (A), then remove the second row seat belt buckle [RH] (B).

    Tightening torque: 39.2 ~ 54 N·m

  4. Install in the reverse order of removal.
  5. Remove the second row seat assembly.
  6. Remove the third row seat assembly.
  7. Remove the rear door sill trim.
  8. Remove the luggage compartment trim (A).
  9. Remove the luggage compartment partition trim (A).
  10. Loosen the mounting screws, then remove the rear cross trim (A).
  11. Loosen the mounting bolt, then remove the second row lower seat belt anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  12. Loosen the mounting bolt, then remove the third row seat belt lower anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  13. Loosen the mounting screws, then remove the luggage side trim (A).
  14. Loosen the mounting bolt, then remove the rear pillar trim (A).
  15. Loosen the mounting bolt, then remove the third row seat. Upper seat belt anchor (A).
  16. Loosen the mounting bolt, then remove the belt guide (B).
  17. Loosen the mounting bolt, then remove the third row seat. Seat belt retractor (C).

    Tightening torque: 39.2 ~ 54 N·m

  18. Install in the reverse order of removal.
  19. Remove the third row seat assembly.
  20. Loosen the mounting bolt, then remove the third row seat. Seat belt buckle (A).

    Tightening torque: 39.2 ~ 54 N·m

  21. Install in the reverse order of removal.
Third Row Seat Belt Retractor Replacement / Third Row Seat Belt Buckle Replacement

Test yourself

A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.