Front Bumper Cover Repair Procedures

Replacement

1. 1
   Pull the headlamp washer nozzle outward.
2. 2
   Then remove the headlamp washer nozzle cover (A) by spreading both retaining pins (B) outward with two awls.

   

3. 3
   Loosen the upper radiator cover mounting clips (A).

   

4. 4
   Loosen the lower front bumper mounting clips.

   

5. 5
   Loosen the front bumper side mounting screw, then disconnect the sides.

   

6. 6
   Disconnect the fog lamp connector (A) and the front parking assist sensor connector (B). [LH]

   

   [RH]

   

7. 7
   Remove the front bumper cover (A).

   

8. 8
   Install in the reverse order of removal.