Kia Cee'd Quiz
Body Electrical System

Headlamp Leveling Switch Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
Done 0 of 7

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the emergency pad lower panel. (Refer to Body - "Emergency Pad Lower Panel")
  3. Remove the lower hazard switch assembly (A) after loosening the screws.

Inspection

  1. Remove the lower hazard switch assembly.
  2. Apply battery voltage to terminal 3 and ground to terminal 4.
  3. Measure the voltage between terminals 4 and 2 in each position. [Switch Position]
    Position No. Rotation Voltage (V) (±5%)
    0 0° 10,85
    1 15° 9,78
    2 30° 9.17
    3 45° 8,55
    4 60° 7,94
    5 75° 7.32
    6 90° 6,71
  4. If the voltage is not as specified, replace the headlamp leveling switch.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.