Kia Cee'd Quiz
Body Electrical System

Parking Assist Sensor Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

[Rear Bumper]
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper cover. (Refer to Body - Rear Bumper Cover)
  3. Disconnect the connector (A) from the front bumper.
  4. Pull out the sensor (B) by opening the sensor holder (C).

Installation

  1. Install the ultrasonic sensor after connecting the connector.
  2. Install the bumper.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.