Kia Cee'd Quiz
Body Electrical System

Power Seat Control Switch Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

  1. With the power seat switch in each position, check that continuity exists between the terminals below. If continuity does not meet the specification, replace the power seat switch. A: Power Seat Control Switch B: Lumbar Support Switch

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front seat outer shield cover (A). (Refer to Body - "Front Seat Outer Shield Cover")
  3. Disconnect the connector of the power seat control switch (A).
  4. Remove the power seat control switch (A) after loosening the mounting screws.

Installation

  1. Connect the connector and install the power seat control switch.
  2. Install the front seat cushion outer cover.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.