Kia Cee'd Quiz
Body (Interior and Exterior)

Rear Bumper Beam Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
4steps
~24min
2/5difficulty
Done 0 of 4

Replacement

  1. Remove the rear bumper cover. (Refer to Rear Bumper - "Rear Bumper Cover")
  2. Disconnect the rear bumper beam mounting wire harness (B).
  3. Disconnect the clips, then remove the rear bumper beam assembly (A).
  4. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.