Kia Cee'd Quiz
Body (Interior and Exterior)

Rear Seat Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
0102030405025.519N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

  1. After loosening the mounting bolts, push the rear seat cushion assembly (A) upward and remove it.

    Tightening torque: 16.7 ~ 26 N·m

    [5-Door, Wagon]
    [3-Door]
  2. Loosen the rear center seat belt lock mounting bolt (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. Remove the rear seat back center hinge bracket cover (A).
  4. Loosen the rear seat back mounting bolt (A).

    Tightening torque: 16.7 ~ 26 N·m

  5. Pull out the rear seat center mounting bracket (A).
  6. Remove the rear seat back assembly (B).
  7. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.