Kia Cee'd Quiz
Body (Interior and Exterior)

Rear Seat Belt Pretensioner Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the rear pillar garnish. (Refer to Interior Trim - "Rear Pillar Trim")
  2. After loosening the mounting bolt, remove the rear seat belt lower anchor (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. After loosening the mounting bolt, remove the rear seat belt pretensioner (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.