Kia Cee'd Quiz
Restraints

Repair Procedures

In this manual: Restraints
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
~1min read

Component Replacement After Deployment

If the front airbags deployed after a collision, replace the following items.
  • SRSCM
  • Deployed airbag(s)
  • Seat belt pretensioner(s)
  • Front impact sensors
  • SRS wiring harnesses
  • Inspect the clock spring for heat damage. If damage is found, replace the clock spring.
If the side/curtain airbags have deployed after a collision, replace the following items.
  • SRSCM
  • Deployed airbag(s)
  • Side impact sensor(s) on the deployed side(s)
  • SRS wiring harnesses
After completing all repairs to the vehicle, make sure the SRS airbag system is functioning properly.
  • Turn the ignition ON. The SRS indicator should illuminate for approximately six seconds and then turn off.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.