Engine Electrical System
Starter Relay Repair Procedures
In this manual: Engine Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Inspection
- Disconnect the negative battery cable.
- Remove the fuse block cover.
- Remove the starter relay (A).

- Using an ohmmeter, check for continuity between each terminal.
Terminal Continuity 30 - 87 NO 85 - 86 YES - Apply 12 V to terminal 85 and ground terminal 86. Check for continuity between terminals 30 and 87.

- If there is no continuity, replace the starter relay.
- Install the starter relay.
- Install the fuse block cover.
Test yourself
A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?