Kia Cee'd Quiz
Suspension System

Wheel Repair Procedures

In this manual: Suspension System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
3steps
~18min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque: 88.3 ~ 108 N·m

Perform inspection
  1. Raise the vehicle.
  2. Measure the wheel runout using a dial indicator as shown in the illustration below.
    Run out Aluminum Steel
    Radial mm (in) Below 0.3 (0.0118) Less than 1.4 (0.0551)
    Lateral mm (in) Below 0.3 (0.0118) Less than 0.9 (0.0354)
  3. If the measured value exceeds the specified value, replace the wheel.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.