Ignition switch
In this manual: Ignition switch
~2min read

Ignition switch and anti-theft steering column lock
Ignition switch position LOCK
The steering wheel locks to protect against theft. The ignition key can be removed only in the LOCK position. When turning the ignition switch to the LOCK position, push the key inward at the ACC position and turn the key toward the LOCK position (manual transaxle). ACC (Accessory)
The steering wheel is unlocked and electrical accessories are operative. ✽ NOTICE
If difficulty is experienced turning the ignition switch to the ACC position, turn the key while turning the steering wheel right and left to release the tension. ON
This is the normal running position after the engine is started. The warning lights can be checked before the engine is started. Do not leave the ignition switch ON if the engine is not running to prevent battery discharge. START
Turn the ignition key to the START position to start the engine. The engine will crank until you release the key; then it returns to the ON position. The brake warning lamp can be checked in this position.
Automatic transaxle
When turning the ignition switch to the LOCK position, the shift lever must be in the P (Park) position.
WARNING
When you intend to park or stop the vehicle with the engine on, be careful not to depress the accelerator pedal for a long period of time. It may overheat the engine or exhaust system and cause fire.
• Do not place any movable objects around the driver’s seat as they may move while driving, interfere with the driver and lead to an accident.
Test yourself
A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?